(Click the image to view full size)
This EMF Detector uses your devices built in Magnetic Sensor.
The sensor works by detecting magnetic fields along the x, y, and z axis or your device.
The difference is that this EMF Detector displays coloured pixels on screen depending on where the magnetic field has come from and how strong the magnetic field is determines how many pixels are displayed.
I have developed this EMF Detector to be slightly different from others. It is a test, using some fairly advanced mathematical algorithms that I have developed, to see if entities / spirits are able to manipulate the magnetic fields through your device magnetic sensor and produce images on the screen using the pixels.
Upon startup, the app will calibrate your magnetic sensor to remove any disturbances around it, then if magentic fields are detected the pixels will change.
If for any reason the detector goes out of sync, just press the "Recalibrate" button on the screen.
It is recommended that you switch your device into "Airplane Mode" to stop any interference.
If your device has not got a Magnetometer built into it then a message will be displayed on the screen stating this and that you can't use it. If this happens, please don't leave a low rating on my app as it is not my fault that your device does not have the hardware.
** Important Note **
This app creates a folder on your device called "SpottedGhosts/EMFDetector"
** Disclaimer **
Use at your own risk, I cannot be held personally responsible for you or any outcome (paranormal or otherwise) from using this app!